Central heating systems develop sludge and corrosion deposits as time progresses. As the sludge and scale builds up it reduces the central heating system’s efficiency. What happens is that the sludge envelops the pipe work and therefore has an effect on how well the central heating system is able to circulate. Central Heating systems need to be cleaned periodically to help the system work properly.
- A Power Flush is a good technique to ensure the whole central heating system is thoroughly cleansed.Power flushing your central heating system allows the heating system to optimize the heat output of radiators and promote energy efficiency
Power flushing uses the power of water at high velocity to clean the system out. In this process though, water is at high velocity but pressure is low so as not to cause any physical damage to the system. The power flushing technique is very simple yet effective. There is a power flushing pump which is connected into the heating system. It can be connected at any position like standard circulator pump coupling, or across the tails of one radiator or any other place. There is an immediate flow reverser device which works with the powerful flush. It dislodges and mobilizes deposits of sludge and scale. To remove the loosened sludge and corrosion deposits, clean water is flown in the heating system which flushes out the dirty water using a full bore dump valve. At the end of the process the heating system holds only the fresh and clean water.
- Prior to power flushing, traditional cleansing systems were not able to move these deposits.
Power flushing can solve heating problems and prevent boiler and pump failure and can even provide lower fuel bills due to an increase in boiler efficiency. This is because the action of power flushing improves the circulation through the pipe work so the radiators and boiler do not have to work so hard. Several problems with your central heating system, like it not getting hot can be solved with a power flush. If your radiators are not getting hot and you constantly have to bleed them you should think of having a power flush. Another indication to have a power flush is when your heating system is noisy. This indicates sludge build up and may really be crying out for a good power flush cleansing.
Who can carry out a Power Flush?
It is vital to choosing a good plumber or heating engineer to carry out your power flushing job. This is very important because a skilled approach and lots of experience is needed to make the most of the efficiency of the job. You will that the highly skilled plumbers and heating engineers will have methodical techniques to isolate and concentrate on troublesome areas so that you are left with an optimized central heating system.
Call Netplumb: 020 3318 2988 (local rate)
